Low Forklift Tipping Bin Model 2012
Low Tipping container 2012
The properties
load capacity up to 1500 kg (3300 lbs)
Capacity: 300 liters to 1500 liters (0.39 to 2 yards)
Self-tipper: Can be tilted at any height by cable pull from the driver's seat
chain safety device against accidental slipping
Powder coating in Eichinger orange (pure orange RAL2004)
Delivery with declaration of conformity and GS mark from TÜV
On request also available in many other variants, e.g. as chip tipping container, flat tipper, mini tipper, sludge dewatering container
The construction
The rectangular trough of the tipping container is made of 3 mm sheet steel and has a stable all-round edge. The low height of the tipper means that it has an ideal loading height for all types of materials. The optimal tipping angle guarantees complete emptying at all fill levels and material types. The base frame is very stable and has entry pockets for the forklift tines. To protect the container from accidentally slipping off the tines, the side tipping container has a chain lock. A durable powder coating protects the surface from corrosion.
The application
The low height of the tipping container makes it ideal for use with machines with low discharge heights. You drive into the drive-in pockets from behind with the forklift tines. Please check in advance whether your tines and the drive-in pocket dimensions are compatible. As soon as you have positioned the tipper on the tines, secure the container with the chain provided to prevent it from slipping off the tines. Then take the end of the release cable to the driver's seat. At your destination, drive the tipping container to the desired height and pull on the wire rope. The tipping container tips forwards automatically. It can be returned to the starting position by lowering it to the ground. To make it easier to set upright again, the tipping container has an additional protruding profile at the bottom of the dumping edge. This greatly simplifies handling and protects the trough from deformation.
additional equipment
Optionally available:
2 swivel and 2 fixed castors
push handle
lid, galvanized, multi-part
hydraulic tipping device
tipping brake
side wall attachment
crane eyes
trailer hitch
powder-coated in RAL special color
hot-dip galvanized version
stainless steel version
oil- and watertight welding
Low Tipping container 2012
The properties
load capacity up to 1500 kg (3300 lbs)
Capacity: 300 liters to 1500 liters (0.39 to 2 yards)
Self-tipper: Can be tilted at any height by cable pull from the driver's seat
chain safety device against accidental slipping
Powder coating in Eichinger orange (pure orange RAL2004)
Delivery with declaration of conformity and GS mark from TÜV
On request also available in many other variants, e.g. as chip tipping container, flat tipper, mini tipper, sludge dewatering container
The construction
The rectangular trough of the tipping container is made of 3 mm sheet steel and has a stable all-round edge. The low height of the tipper means that it has an ideal loading height for all types of materials. The optimal tipping angle guarantees complete emptying at all fill levels and material types. The base frame is very stable and has entry pockets for the forklift tines. To protect the container from accidentally slipping off the tines, the side tipping container has a chain lock. A durable powder coating protects the surface from corrosion.
The application
The low height of the tipping container makes it ideal for use with machines with low discharge heights. You drive into the drive-in pockets from behind with the forklift tines. Please check in advance whether your tines and the drive-in pocket dimensions are compatible. As soon as you have positioned the tipper on the tines, secure the container with the chain provided to prevent it from slipping off the tines. Then take the end of the release cable to the driver's seat. At your destination, drive the tipping container to the desired height and pull on the wire rope. The tipping container tips forwards automatically. It can be returned to the starting position by lowering it to the ground. To make it easier to set upright again, the tipping container has an additional protruding profile at the bottom of the dumping edge. This greatly simplifies handling and protects the trough from deformation.
additional equipment
Optionally available:
2 swivel and 2 fixed castors
push handle
lid, galvanized, multi-part
hydraulic tipping device
tipping brake
side wall attachment
crane eyes
trailer hitch
powder-coated in RAL special color
hot-dip galvanized version
stainless steel version
oil- and watertight welding